Renesas Computer Hardware H8 36037 User Guide

H8/36037, H8/36057 Group Expansion I/O Board  
for E6000 Emulator  
HS36037EIO61H User’s Manual  
Renesas Microcomputer Development Environment System  
H8 Family / H8/300H Tiny Series  
Rev.1.00  
200D3o.w1nl2oa.d1fr9om Www.Somanuals.com. All Manuals Search And Download.  
Cautions  
Keep safety first in your circuit designs!  
1. Renesas Technology Corp. puts the maximum effort into making semiconductor products  
better and more reliable, but there is always the possibility that trouble may occur with them.  
Trouble with semiconductors may lead to personal injury, fire or property damage.  
Remember to give due consideration to safety when making your circuit designs, with  
appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of  
nonflammable material or (iii) prevention against any malfunction or mishap.  
Notes regarding these materials  
1. These materials are intended as a reference to assist our customers in the selection of the  
Renesas Technology Corp. product best suited to the customer's application; they do not  
convey any license under any intellectual property rights, or any other rights, belonging to  
Renesas Technology Corp. or a third party.  
2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any  
third-party's rights, originating in the use of any product data, diagrams, charts, programs,  
algorithms, or circuit application examples contained in these materials.  
3. All information contained in these materials, including product data, diagrams, charts,  
programs and algorithms represents information on products at the time of publication of these  
materials, and are subject to change by Renesas Technology Corp. without notice due to  
product improvements or other reasons. It is therefore recommended that customers contact  
Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for  
the latest product information before purchasing a product listed herein.  
The information described here may contain technical inaccuracies or typographical errors.  
Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss  
rising from these inaccuracies or errors.  
Please also pay attention to information published by Renesas Technology Corp. by various  
means, including the Renesas Technology Corp. Semiconductor home page  
(http://www.renesas.com).  
4. When using any or all of the information contained in these materials, including product data,  
diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total  
system before making a final decision on the applicability of the information and products.  
Renesas Technology Corp. assumes no responsibility for any damage, liability or other loss  
resulting from the information contained herein.  
5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a  
device or system that is used under circumstances in which human life is potentially at stake.  
Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product  
distributor when considering the use of a product contained herein for any specific purposes,  
such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or  
undersea repeater use.  
6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in  
whole or in part these materials.  
7. If these products or technologies are subject to the Japanese export control restrictions, they  
must be exported under a license from the Japanese government and cannot be imported into a  
country other than the approved destination.  
Any diversion or reexport contrary to the export control laws and regulations of Japan and/or  
the country of destination is prohibited.  
8. Please contact Renesas Technology Corp. for further details on these materials or the products  
contained therein.  
 
IMPORTANT INFORMATION  
READ FIRST  
• READ this user's manual before using this emulator product.  
• KEEP the user's manual handy for future reference.  
Do not attempt to use the emulator product until you fully understand its mechanism.  
Emulator Product:  
Throughout this document, the term "emulator product" shall be defined as the following  
products produced only by Renesas Technology Corp. excluding all subsidiary products.  
E6000 series emulator station  
Expansion I/O board  
User system interface cables  
PC interface board  
The user system or a host computer is not included in this definition.  
Purpose of the Expansion I/O Board:  
This expansion I/O board is installed in the E6000 emulator, and enables the emulator station to be  
connected to the user system interface cable. This expansion I/O board must only be used for the  
above purpose.  
Improvement Policy:  
Renesas Technology Corp. (including its subsidiaries, hereafter collectively referred to as  
Renesas) pursues a policy of continuing improvement in design, functions, performance, and  
safety of the emulator product. Renesas reserves the right to change, wholly or partially, the  
specifications, design, user's manual, and other documentation at any time without notice.  
Target User of the Emulator Product:  
This emulator product should only be used by those who have carefully read and thoroughly  
understood the information and restrictions contained in the user's manual. Do not attempt to use  
the emulator product until you fully understand its mechanism.  
It is highly recommended that first-time users be instructed by users that are well versed in the  
operation of the emulator product.  
I
 
LIMITED WARRANTY  
Renesas warrants its emulator products to be manufactured in  
accordance with published specifications and free from defects in  
material and/or workmanship. Renesas, at its option, will repair or  
replace any emulator products returned intact to the factory,  
transportation charges prepaid, which Renesas, upon inspection,  
determine to be defective in material and/or workmanship. The foregoing  
shall constitute the sole remedy for any breach of Renesas's warranty.  
See the Renesas warranty booklet for details on the warranty period. This  
warranty extends only to you, the original Purchaser. It is not transferable  
to anyone who subsequently purchases the emulator product from you.  
Renesas is not liable for any claim made by a third party or made by you  
for a third party.  
DISCLAIMER  
RENESAS MAKES NO WARRANTIES, EITHER EXPRESS OR  
IMPLIED, ORAL OR WRITTEN, EXCEPT AS PROVIDED  
HEREIN, INCLUDING WITHOUT LIMITATION THEREOF,  
WARRANTIES AS TO MARKETABILITY, MERCHANTABILITY,  
FITNESS FOR ANY PARTICULAR PURPOSE OR USE, OR  
AGAINST INFRINGEMENT OF ANY PATENT. IN NO EVENT  
SHALL RENESAS BE LIABLE FOR ANY DIRECT, INCIDENTAL  
OR CONSEQUENTIAL DAMAGES OF ANY NATURE, OR  
LOSSES OR EXPENSES RESULTING FROM ANY DEFECTIVE  
EMULATOR PRODUCT, THE USE OF ANY EMULATOR  
PRODUCT, OR ITS DOCUMENTATION, EVEN IF ADVISED OF  
THE POSSIBILITY OF SUCH DAMAGES. EXCEPT AS  
EXPRESSLY STATED OTHERWISE IN THIS WARRANTY, THIS  
EMULATOR PRODUCT IS SOLD "AS IS ", AND YOU MUST  
ASSUME ALL RISK FOR THE USE AND RESULTS OBTAINED  
FROM THE EMULATOR PRODUCT.  
II  
 
State Law:  
Some states do not allow the exclusion or limitation of implied warranties or liability for  
incidental or consequential damages, so the above limitation or exclusion may not apply to you.  
This warranty gives you specific legal rights, and you may have other rights which may vary from  
state to state.  
The Warranty is Void in the Following Cases:  
Renesas shall have no liability or legal responsibility for any problems caused by misuse,  
abuse, misapplication, neglect, improper handling, installation, repair or modifications of the  
emulator product without Renesas's prior written consent or any problems caused by the user  
system.  
All Rights Reserved:  
This user's manual and emulator product are copyrighted and all rights are reserved by  
Renesas. No part of this user's manual, all or part, may be reproduced or duplicated in any form, in  
hard-copy or machine-readable form, by any means available without Renesas's prior written  
consent.  
Other Important Things to Keep in Mind:  
1. Circuitry and other examples described herein are meant merely to indicate the characteristics  
and performance of Renesas's semiconductor products. Renesas assumes no responsibility for  
any intellectual property claims or other problems that may result from applications based on  
the examples described herein.  
2. No license is granted by implication or otherwise under any patents or other rights of any third  
party or Renesas.  
Figures:  
Some figures in this user's manual may show items different from your actual system.  
Limited Anticipation of Danger:  
Renesas cannot anticipate every possible circumstance that might involve a potential hazard.  
The warnings in this user's manual and on the emulator product are therefore not all inclusive.  
Therefore, you must use the emulator product safely at your own risk.  
III  
 
SAFETY PAGE  
READ FIRST  
• READ this user's manual before using this emulator product.  
• KEEP the user's manual handy for future reference.  
Do not attempt to use the emulator product until you fully understand its mechanism.  
DEFINITION OF SIGNAL WORDS  
This is the safety alert symbol. It is used to alert you to potential personal  
injury hazards. Obey all safety messages that follow this symbol to avoid  
possible injury or death.  
DANGER  
DANGER indicates an imminently hazardous situation which, if not  
avoided, will result in death or serious injury.  
WARNING  
WARNING indicates a potentially hazardous situation which, if not  
avoided, could result in death or serious injury.  
CAUTION  
CAUTION indicates a potentially hazardous situation which, if not  
avoided, may result in minor or moderate injury.  
CAUTION  
CAUTION used without the safety alert symbol indicates a  
potentially hazardous situation which, if not avoided, may result  
in property damage.  
NOTE  
emphasizes essential information.  
IV  
 
WARNING  
Observe the precautions listed below. Failure to do so  
will result in a FIRE HAZARD and will damage the user  
system and the emulator product or will result in  
PERSONAL INJURY. The USER PROGRAM will be  
LOST.  
1. Do not repair or remodel the emulator product by  
yourself for electric shock prevention and quality  
assurance.  
2. Always switch OFF the E6000 emulator and user system  
before connecting or disconnecting any CABLES or  
PARTS.  
3. Always before connecting any CABLES, make sure that  
pin 1 on both sides are correctly aligned.  
4. Supply power according to the power specifications and  
do not apply an incorrect power voltage. Use only the  
provided power cable.  
V
 
Preface  
Thank you for purchasing this H8/36037 series, H8/36057 series expansion I/O board  
(HS36037EIO61H; hereinafter referred to as the expansion I/O board) for the H8 series E6000  
emulator.  
The expansion I/O board enables user systems for Renesas's original microcomputer H8/36037  
series, H8/36057 series to be developed using an H8/3664 series E6000 emulator  
(HS3664EPI61H; hereinafter referred to as the emulator).  
i
 
Contents  
Section 1 Overview ..........................................................................................1  
1.1 Environment Conditions....................................................................................................1  
1.2 Supported MCUs and User System Interface Cables........................................................2  
1.3 Operating Voltage and Frequency Specifications .............................................................3  
1.4 Components ......................................................................................................................4  
Section 2 Connection Procedures......................................................................5  
2.1 Using Emulator without Connecting User System ............................................................5  
2.2 Using Emulator with Connecting User System through User System Interface Cable......6  
Section 3 User System Interface........................................................................8  
Section 4 Notice.................................................................................................9  
ii  
 
Section 1 Overview  
The H8/36037 series, H8/36057 series E6000 expansion I/O board (hereinafter referred to as the  
expansion I/O board) is an efficient software and hardware development support tool for  
application systems using Renesas's original microcomputers H8/36037 series, H8/36057 series  
HCAN interface.  
The expansion I/O board should be used with H8/3664 series E6000 emulator station  
(HS3664EPI61H: hereinafter referred to as the emulator).  
1.1  
Environment Conditions  
Table 1.1 Environment Conditions  
Item  
Specifications  
Temperature  
Operating: +10 to +35°C  
Storage: –10 to +50°C  
Humidity  
Operating: 35 to 80% RH; no condensation  
Storage: 35 to 80% RH; no condensation  
No corrosive gases  
Ambient gases  
Power supply  
Power supply from E6000 emulator station  
Depends on the MCU within the range 3.0 V to 5.5 V  
User system voltage (UVcc)  
1
 
1.2  
Supported MCUs and User System Interface Cables  
Table 1.2 shows the correspondence between the MCUs and the user system interface cables  
supported by the E6000.  
H8/36037 Series, H8/36057 Series:  
Table 1.2 H8/36037 Series, H8/36057 Series MCUs and User System Interface Cable  
MCU Type  
No.  
Number  
Package  
E6000 User System Interface Cables  
HS3687ECH61H  
1
HD64F36057  
HD64F36054  
HD64336057  
HD64336054  
HD64F36037  
HD64F36034  
HD64336037  
HD64336034  
64-pin LQFP(FP-64E)  
64-pin QFP(FP-64A)  
HS3687ECH62H  
2
 
1.3  
Operating Voltage and Frequency Specifications  
Table 1.3 shows the MCU operating voltage and frequency specifications supported by the E6000.  
If the E6000 is used in an environment that exceeds the operating voltage range and operating  
frequency range guaranteed for the MCU operation, normal emulator operation is not guaranteed.  
Table 1.3 Operating Voltage and Frequency Specifications  
Operating Frequency  
No.  
MCU Types  
Operating Voltage (V)  
3.0-5.5  
(φ) (MHz)  
2-10  
1
H8/36037 Series  
H8/36057 Series  
4.0-5.5  
2-20  
NOTE  
For details on the operating voltage and frequency  
specifications, refer to the MCU hardware manual.  
3
 
1.4  
Components  
Figure 1.1 shows the HS36037EIO61H expansion I/O board appearance, and table 1.4 lists the  
components of the expansion I/O board. Please make sure you have all of these components when  
unpacking.  
E 6 0 0 0  
Figure 1.1 HS36037EIO61H Expansion I/O Board  
Table 1.4 HS36037EIO61H Components  
No. Component  
Quantity  
Remarks  
1
2
HS36037EIO61H  
Documentation  
1
1
Expansion I/O board  
User’s manual for HS36037EIO61H (this  
manual)  
4
 
Section 2 Connection Procedures  
WARNING  
Always switch OFF the user system and the emulator  
product before the EXPANSION I/O BOARD or USER  
SYSTEM INTERFACE CABLE is connected to or removed  
from any part. Before connecting, make sure that pin 1 on  
each side is correctly aligned. Failure to do so will result in  
a FIRE HAZARD and will damage the user system, the  
emulator product, the user system interface cable, and the  
expansion board, or will result in PERSONAL INJURY. The  
USER PROGRAM will be LOST.  
2.1  
Using Emulator without Connecting User System  
1. Make sure the emulator is turned off.  
2. After making sure the direction of the expansion I/O board connector labeled E6000  
EMULATOR is correct, firmly insert the expansion I/O board connector into the emulator  
station connector. When the emulator is operated while connected to only the expansion I/O  
board (without connecting the user system), disconnect the cable body from the expansion I/O  
board.  
5
 
2.2  
Using Emulator with Connecting User System through User System  
Interface Cable  
CAUTION  
When connecting or removing the user system interface  
cable, apply force only in the direction suitable for  
connection or removal, while making sure not to bend or  
twist the cable or connectors.  
Otherwise, the cables or connectors will be damaged.  
1. Make sure the emulator and the user system are turned off.  
2. [1] After making sure the direction of the expansion I/O board connector labeled E6000  
EMULATOR is correct, firmly insert the expansion I/O board connector into the emulator  
station connector ([1] in figure 2.1).  
[2] To connect the expansion I/O board labeled USER INTERFACE CABLE and the user  
system interface cable body.  
6
 
Emulator station  
E 6 0 0 0  
[1]  
Expansion I/O board  
E 6 0 0 0  
[2]  
Cable body connector  
CTS screws (M3 x 6 mm)  
User system interface cable  
Figure 2.1 Connecting Expansion I/O Board to Emulator Station and  
User System Interface Cable  
7
 
Section 3 User System Interface  
Switches, protection circuits, and termination circuits are provided for the H8/36037 HCAN  
interface of the expansion I/O board. Signals are connected to the user system interface cable with  
the protection circuit. Figure 3.1 shows user system interface circuit.  
E6000 (HS3664EPI61H)  
HS36037EIO61H  
Vcc  
47 k  
H8/3664  
H8/36037  
Evaluation chip  
47 Ω  
User system  
interface cable  
Port 9  
Figure 3.1 User System Interface Circuit (Port 9)  
8
 
Section 4 Notice  
WARNING  
Observe the precautions listed below. Failure to do so will  
result in a FIRE HAZARD and will damage the user system  
and the emulator product or will result in PERSONAL  
INJURY. The USER PROGRAM will be LOST.  
1. This expansion I/O board is specifically designed for the  
HS3664EPI61H. Do not use this expansion I/O board  
with any other emulator station.  
2. Use the H8/3687, H8/36037 and H8/36057 series user  
system interface cable (HS3687ECH61H for FP-64E or  
HS3687ECH62H for FP-64A).  
Do not use any otherseries of user system interface  
cable.  
1. Do not place heavy objects on the expansion I/O board.  
2. Power is supplied from the emulator station to the expansion I/O board.  
9
 
H8/36037, H8/36057 Group  
Expansion I/O Board for E6000 Emulator  
User’s Manual  
REJ10B0096-0100H  
 

Pyramid Car Audio CD Player CDR22KIT User Guide
Radio Shack PDAs Smartphones 65 780 User Guide
Samsung Air Conditioner AM14B1B2E07 User Guide
Samsung Computer Drive BG68 01622A User Guide
Satco Products Work Light PAR16 User Guide
Scag Power Equipment Lawn Mower SW32 14BV User Guide
Schumacher Power Supply 00 99 000867 0109 User Guide
Scotts CD Player SMV122 User Guide
SeaLand Vacuum Cleaner VACUFLUSH User Guide
Sennheiser Car Stereo System EK 1013 6 User Guide