Rosewill Computer Accessories RX81US HT35B BLK User Guide

External Enclosure for  
3.5" SATA to USB + eSATA  
RX81US-HT35B-BLK  
User Manual  
 
External Enclosure For 3.5” SATA to USB + eSATA  
User Manual  
Available Interfaces  
USB 2.0 + e-SERIAL ATA  
Protection of DC adapter  
a. Primary (Input) Protection  
The input power line will be fused with a fuse 2.0A, 250 VAC.  
b. Secondary (Output) protection  
b.1. Over Current (OC) Protection  
When an internal fault occurs, or an external fault is applied to the  
power, such that an overload or short circuit is applied to the  
output, the power will be shutdown. Power latch is not allowed.  
b.2 Over Voltage (OV) Protection  
If an over-voltage fault occurs on the adapter output, the power  
will shutdown.  
b.3 Short Circuit Protection  
The power will protect itself, and shut down, if a short circuit is  
placed between DC return and the output. This condition will  
cause no damage to the power. Power latch is not allowed.  
2
 
External Enclosure For 3.5” SATA to USB + eSATA  
User Manual  
Package Contents  
z 3.5 inch external enclosure  
z Driver Disk  
z Installation Guide  
z AC adapter  
z USB cable  
z eSATA cable  
z Footstand  
z Screw Kit  
FEATURE  
z Standard USB 2.0 high speed transfer rate.  
z Support Serial ATA. (USB + e-SATA)  
z Aluminum HDD frame for easy installation.  
z Crystal acrylic casing with blue & green LED illumination.  
z Suitable for all 3.5" SATA HDD.  
z All aluminum, to enhance heat dissipation.  
z Crystal footstand for vertical style.  
z Plug and play / hot swappable.  
z OS support Windows 98SE/ME/2000/XP/Vista/Mac OS 8.6  
above.  
3
 
External Enclosure For 3.5” SATA to USB + eSATA  
User Manual  
Technical Specifications  
Bus  
USB v 2.0 / eSATA  
Interfaces:  
USB 2.0 = 480 Mbps  
Data Speeds  
eSATA = 3.0 Gbps (NCQ Support)  
Connectors  
SATA  
USB B receptacle / eSATA connectors  
Compliant with SATA I / II with NCQ  
support  
Standard  
LED  
Power On / Access  
AC Adapter 12V 2A  
100V ~240V full range  
208 (D)*128 (W)*36(H) mm  
0.84Kg  
Power Supply  
AC Input  
Dimensions  
Weight:  
Certification  
CE  
4
 
External Enclosure For 3.5” SATA to USB + eSATA  
User Manual  
Installation Guide  
1. Pull the bottom (as fig.1) to release the HDD tray.  
2. Fix the HDD by screws after HDD located with the connecter.  
5
 
External Enclosure For 3.5” SATA to USB + eSATA  
User Manual  
3. Aims at trail and pull in the tray into external box.  
4. After connect USB / SATA and Power cable, HDD will appear  
the relativity.  
Attention:  
z Make sure your PCI Host Card is installed correctly  
z If required, update your OS (win 2000 to SP4, Win xp to SP1a)  
z Only one interface at the time can be used (combo model)  
6
 
External Enclosure For 3.5” SATA to USB + eSATA  
User Manual  
Driver Installation:  
Windows 98SE  
z After plug the external box into, the system will remind you  
there is a new hardware of USB Storage Adapter add into.  
z Design the driver of the safe path (in the driver), the system will  
active the installation automatically.  
z After for a while, click "My Computer", USB HDD will appear the  
relativity on the PC.  
Windows ME/2000/XP/Vista  
The system already provided support for the software.  
MAC OS 8.6/9.x/above  
OS 8.6 edition:  
z The Driver is the “GeneUSBIDE_05E3_0702.sit” under the  
catalogue of the MAC, copy the document to the tope a table  
and clicks the document out, and then it will occur  
the document of the driver automatically.  
z Please copy the driver document to the system folder of the PC.  
-- (System Folder) -(extensions).  
z Connect with the USB HDD  
OS 9.X edition:  
The system already provides support for the software.  
7
 
External Enclosure For 3.5” SATA to USB + eSATA  
User Manual  
The divided partition of the external HDD  
Win 98SE/ME SYSTEM  
FDISK is command that doing the divided partition to HDD, The  
step of how to divided partition from the HDD by using FDISK as  
follows:  
z Plug the cable of USB into PC, and be sure that the PC has  
identified HDD.  
z Execute "FDISK" under the model of COMMAND.  
z After enter the FDISK program [If the FDISK program does not  
work, please restart your PC again (don't plug out the USB  
HDD) then it will be work]. Firstly select "The fifth item" -- select  
the USB HDD you want to divided partition for, then just see  
the illustration as follows: Then just follow the instruction to  
divided partition for the HDD of USB.  
Windows 2000/XP/Vista  
Plug the HDD into your system, it will appear the hot plug a play.  
Just click “Control Panel”/ “manage tool” / “computer  
management” / “Disk management”. All the disk connects to the  
PC will appear on the chart, as well as the state of the HDD. Find  
out the HDD and click the right bottom of the mouse under the  
state of chart, just follow the step. Take a look of the icon on the  
bottom.  
Mac OS  
Mac OS9.2 and earlier version does not support creating partition  
on an external HDD. For your new HDD, you need to purchase  
additional 3rd party software to creating your HDD partition.  
For Mac OS X, use the Disk Utility to format and divided partitions  
on your external disk.  
• Select “Disk Utilities” in the utilities folder.  
• Choose your external drive and format it.  
8
 
External Enclosure For 3.5” SATA to USB + eSATA  
User Manual  
Notice: If you want your ENCLOSURE on a Windows as well as on  
your Mac OS, we recommend you to use a PC to format the drive.  
Choose FAT32 format and do not change anything on the partition  
or format on your Mac, otherwise the Windows OS can not be able  
to recognize the enclosure.  
To remove the device:  
For Windows 98SE Users  
Before you remove your device please wait for “Access LED” on  
reader stops blinking to prevent data loss.  
For Windows ME/2000/XP/Vista Users  
Please double-click the icon  
box will appear.  
on the system tray. A dialog  
Double-click the Generic USB Storage Device to remove the  
device for preventing from data loss.  
Mac OS  
You can remove the cable of USB after putting the icon of USB  
HDD on the desktop into the trash can.  
9
 
External Enclosure For 3.5” SATA to USB + eSATA  
User Manual  
FAQ  
How to solve it if you can’t use the Mobile Disk under some  
OS:  
It doesn’t support any USB device under the WIN95 and NT4 OS,  
so that can’t use the Mobile Disk.  
After formatting can PC use in the MAC?  
If use the Mobile Disk in the PC, can just format directly. If the PC  
& MAC cannot be in common use, you can use the MACOPEN  
software (download from the Internet) in the PC, format to the  
MAC model. If you used the MO storage before, you must familiar  
and have more experience about it because MO storage has the  
same problem when doing the format.  
Why I can not see the drive?  
If you can not see the drive, make sure the jumper settings of your  
hard drive is “master”.  
Thank you for purchasing a quality Rosewill Product.  
and future support for your product.  
10  
 

Radio Shack Telephone ET 894 User Guide
Reebok Fitness Treadmill RBTL12911 User Guide
Roland Electronic Keyboard At 20s User Guide
Salton Coffeemaker MEMB1W User Guide
Samsung Flat Panel Television 320MP 2 User Guide
Samsung Printer ML 3051N User Guide
Samsung Speaker System HWH550 User Guide
Samsung Washer B1113J B913J User Guide
Scotts Lawn Mower S2546 User Guide
Senco Staple Gun SHPIO User Guide