Rosewill Mouse RM2060 User Guide

RM2060 WIRED LASER  
5+1 BUTTONS MOUSE  
USER’S MANUAL  
Thank you for purchasing a quality Rosewill Product.  
support for your product.  
 
Getting Started  
Congratulations on your purchase of LASER 5+1 button mouse. LASER  
mouse is the last technique of mouse industry. The most important feature for  
LASER mouse is that can work on most of shining surface and glass. In  
additional, its high resolution, 800/1600 hardware dpi, provide users a great  
experience to operate.  
Package Contains  
Your RM2060 Mouse package includes the following:  
1. RM2060 LASER mouse  
2. User’s manual  
3. CD-ROM Driver for Windows OS  
NoteIf any part is missing, please contact your dealer for a replacement  
immediately.  
Hardware Installation Guide  
Step 1. Plug the USB connector to Computer  
1. USB is a PnP device; you can plug the device no matter the computer is on  
or off. Of course, you can remove USB device in the same way.  
2. If the device is HD or pen drive or any device which can store files, stop the  
device than remove is the best way to protect the files.  
Step 2. Waiting for new device detection  
1. If your system is Windows ME/ 2000/ XP, windows will find a new device and  
install standard driver automatically.  
2. The standard software only support standard functions and will not support  
special one of the mouse.  
Software Installation & Operation Guide  
To install the software, please follow the steps below to finish:  
1. Insert the Auto-Run CD-ROM onto CD-ROM driver, the installation menu  
will be executed automatically. (If the auto-run does not function itself, double-click  
RRM2060 User Manu_0917.doc  
Page 2 of 6  
1st Edition  
 
the “setup” icon in the CD files.)  
2. The setup program will guide you to finish the installation step by step.  
3. After you finish the installation, select "Restart" to reboot your system and activate  
multimedia hot keys and wheel scrolling functions.  
4. After installed the driver, a symbol will show in the right hand side of working bar.  
Programmable Office-Web Hot Keys  
When you install the included software driver the mouse hot keys will be enable  
with driver default.  
The Office-Wheel Function is attached on the mouse software as following.  
Users can change the default function of wheel and extra hot-keys.  
Default setting for these hot keys is programmable as following as shown on the  
application by running the “Office-Web Wheel Center” as following:  
Dpi switch button  
Office Wheel  
Tilt Wheel  
Web Wheel  
RRM2060 User Manu_0917.doc  
Page 3 of 6  
1st Edition  
 
GENERAL SPECIFICATIONS  
High-tech VCSEL LASER mouse  
1,600dpi hardware resolution  
800/ 1,600 Dpi switch  
Power Rating: 5V DC / 30 mA  
5+1 buttons design with tilt wheel  
Programmable hot-keys  
Office hot button  
Internet hot button  
Right hand Ergonomic design for comfortable grip.  
Operating Temperature Range:5~ 45℃  
Troubleshooting  
MOUSE NOT DETECTED  
z
z
z
z
Please note that USB port needs driver to active in Windows 95/ 98/ NT, or the  
USB mice will not working.  
Make sure the mouse cable is plugged into the correct port-USB. An USB mouse  
connects only to a USB port.  
Make sure your USB port has the proper configuration. Refer to your computer  
documentation for the correct port configuration.  
You may have other system devices (e.g. a modem card) that conflict with the  
mouse. Check the IRQ/address settings of these devices for conflicts, and  
change the setting as required. Refer to your computer documentation to make  
these changes. Determine whether the problem is mouse or system related, try  
the mouse on a second system or a different mouse on your current system.  
Note: If mouse is not be detected and you installed driver already, a symbol will be  
showed in the right hand side of working bar. (as the photo as follow)  
RRM2060 User Manu_0917.doc  
Page 4 of 6  
1st Edition  
 
Electromagnetic Characteristics (EMC)  
Tested to comply with FCC standards  
For home or office use  
This device complies with Part 15 of the FCC Rules. Operation is subject to the  
following two conditions: (1) This device may not cause harmful interference, and (2)  
this device must accept any interference received, including interference that may  
cause undesired operation.  
CE - Type acceptance: EN55022/EN55024 I.T.E. Product  
Thank you for purchasing a quality Rosewill Product.  
support for your product.  
RRM2060 User Manu_0917.doc  
Page 5 of 6  
1st Edition  
 

Radio Shack MP3 Player Accessories 12 636 User Guide
Renesas Network Card PC7501 User Guide
Ricoh Digital Camera Caplio R6 User Guide
RocketFish Bluetooth Headset RF QX4 User Guide
Rolls DJ Equipment MX34c User Guide
Rotel Stereo Amplifier RA 870 User Guide
Samsung Bluetooth Headset GH68 18475A User Guide
Samsung Flat Panel Television 400EX User Guide
Samsung Satellite TV System MF68 00271A User Guide
Sanyo Battery Charger CP 3600CR User Guide