Rosewill Network Card RC504 User Guide

PCIe FireWire 1394a Card 2+1 Ports RC504  
User Manual  
 
PCIe FireWire 1394a Card 2+1 Ports RC504  
User Manual  
Package Contents  
1 x PCIe FireWire Card 2+1 Ports  
1 x User’s Manual  
IEEE 1394a Cable  
Ulead Video Studio CD  
Hardware Installation  
Turn Off the power to your computer.  
Unplug the power cord and remove your computer’s cover.  
Remove the slot bracket from an available PCIe slot.  
To install the card, carefully align the card’s bus connector with the  
selected PCIe slot on the motherboard. Push the board down  
firmly.  
Connect the system power source to the board’s power connector.  
Replace the slot bracket’s holding screw to secure the card.  
Replace the computer cover and reconnect the power cord.  
3
 
Driver Installation  
Please make sure the board is installed before proceeding with driver  
installation.  
Important: If your system doesn’t boot to Windows properly with our  
card installed, check with your system’s manufacturer for the latest  
system firmware update.  
Windows® 2000/XP/Vista  
Windows® 2000/XP/2003/Vista will automatically detect and install the  
correct driver for the FireWire 3-Port PCIe Card.  
To Verify Windows Installation  
Right click My Computer, then click Manage, click Device Manager. The  
Device Manager window opens. Scroll to the IEEE 1394 Bus host  
controllers icon and click on the plus symbol, the VIA OHCI Compliant  
IEEE 1394 Host Controller should be displayed.  
Thank you for purchasing a quality Rosewill Product.  
warranty information and future support for your product.  
 

PYLE Audio Turntable PLTTB 1 User Guide
Q See Home Security System QR4074 418 User Guide
Radio Shack Battery Charger 23 322 User Guide
Robotis Automobile Electronics RX 28 User Guide
Roper Range SGS395X User Guide
Rotel Stereo Receiver RX 940AX User Guide
Ryobi Saw TS1141 User Guide
Samsung Cell Phone A886 User Guide
Sanitaire Vacuum Cleaner SC3680 Series User Guide
Sennheiser Computer Monitor CX 400 User Guide