Rosewill Network Card RCR103 User Guide

CARD READER RCR103  
USER’S Manual  
 
CARD READER RCR103  
USER’S Manual  
Software Installation  
If your operation system if Windows 95/98/98SE, please install the driver.  
1. Put the CD packed with the RCR-103 into the CD-ROM drive.  
2. The InstallShield Wizard will be popped out.  
Please follow the on-screen introduction to finish the installation.  
Change the front panel  
1. Remove the upper cover of the RCR-103.  
2. Apply a suitable size of the screwdriver with the flat head and  
insert the screwdriver into the gap showed on the picture.  
Gently press the locked tab and push onward to make front  
panel out.  
GAP  
3. Apply the same procedure of the step 3 and step 4 on the other  
side of the front panel and install the desired front panel to the  
RCR-103.  
Thank you for purchasing a quality Rosewill Product.  
for your product.  
3
 

Quantum Marine Sanitation System 6 01376 05 User Guide
Radica Games Games 72046 User Guide
Rangemaster Dishwasher RDW945FI User Guide
Remington Power Tools Chainsaw Electric Chain Saw User Guide
Renesas Network Card R0E33062PMSRC0 User Guide
Samsung Camcorder DC161WBi User Guide
Samsung Telescope DMR57 User Guide
Scag Power Equipment Lawn Mower SLM 40 User Guide
Sears Treadmill 83129725 User Guide
Senco Nail Gun SCN40DW User Guide