Rosewill Network Card RNWA PoE 100 User Guide

PoE Injector RNWA-PoE-100  
User Manual  
 
PoE Injector RNWA-PoE-100  
User Manual  
Chapter 1  
Chapter 1 Overview  
Thank you for choosing the RNWA-PoE-100 PoE Injector. The Power over Ethernet  
(PoE*) Injector is able to supply steady power to Powered Device (PD*) or PoE  
Splitter over the Ethernet cable. The Ethernet equipment can work as a Power  
Sourcing Equipment (PSE*) with the help of the RNWA-PoE-100 connection.  
PoE technology allows the existing Ethernet infrastructure to transmit electrical power,  
along with data, to remote IP endpoints over the Ethernet cables, which can greatly  
save the cost of the external power cables. Your network can benefit from PoE  
technology for it will ensure the normal working status of your network while keep the  
existing Ethernet infrastructure secure.  
*PoE: This technology describes a system to transmit electrical power, along with  
data, to remote devices over standard twisted-pair cable in an Ethernet  
network.  
*PD: A device powered by a PSE and thus consumes energy. Examples include  
powering IP telephones, wireless LAN access points, network cameras,  
network hubs, embedded computers etc.  
*PSE: A device (switch or hub for instance) that will provide power in a PoE setup.  
1.1 Package Content  
Before getting started, please verify that your package includes the following items:  
Rosewill RNWA-PoE-100 PoE Injector  
One Power Adapter  
One Ethernet (CAT5 UTP) Cable  
This User Guide  
Note: Please make sure that the package contains the above items. If any of the  
listed items are damaged or missing, please contact with your distributor.  
3
 
   
PoE Injector RNWA-PoE-100  
User Manual  
1.2 Features  
Complies with IEEE 802.3, IEEE 802.3u, IEEE 802.3af standards  
Compatible with PoE compliant PDs and PoE Splitters  
Transmits electrical power along with data in one single cable  
External 48V DC power supply  
Supports Plug-and-Play for the devices, without any configuration  
Extended Distance up to 100 meters for power and data  
1.3 Product Specification  
Normal  
Standards  
IEEE 802.3, IEEE 802.3u, IEEE 802.3af  
PoE Port  
Ports  
100BASE-TX / 10BASE-T dual purpose port  
LAN Port  
Cabling Type  
LED  
RJ45 CAT 5 UTP cable  
PWR  
Safety & Emissions  
FCC, CE  
Environmental and Physical  
Operating Temp  
0~40(32~104)  
Storage Temp  
-40~70(-40~158)  
10%~90% RH, Non-condensing  
5%~90% RH, Non-condensing  
Operating Humidity  
Storage Humidity  
4
 
   
PoE Injector RNWA-PoE-100  
User Manual  
Chapter 2  
Chapter 2 External Component  
2.1 Hardware Diagram  
POWER+DATA OUT: Connect to  
the PD or PoE Splitter with a CAT5  
UTP cable.  
DC 48V: Connect to the provided  
power adapter which can supply  
steady power of 48V DC.  
LAN IN: Connect to a network device  
(such as a Switch or Router) with CAT5  
UTP cable.  
PWR: Power LED, a steady green light indicates that the PoE  
system has detected the PD or PoE Splitter and the power  
adapter is working properly.  
5
 
   
PoE Injector RNWA-PoE-100  
User Manual  
Chapter 3  
Chapter 3 Connecting the PoE Injector  
You can use RNWA-PoE-100 PoE Injector with PD or PoE Splitter to expand your  
network to where there are no power lines or outlets, where you wish to fix devices  
such as APs, IP Cameras or IP Phones, etc.  
The following steps will tell you how to connect the PoE Injector correctly.  
1.  
Use a CAT5 UTP cable to connect port of Ethernet device (such as a switch,  
hub or router) to the LAN IN port.  
2.  
Please connect the power adapter properly to a power socket with provided  
power cable, and then connect the other end of the power adapter to the DC  
48V port of the RNWA-PoE-100.  
3.  
Connect the POWER+DATA OUT port of the RNWA-PoE-100 to a PD or a  
PoE Splitter with CAT 5 UTP cable.  
Now, the device can work normally with data and power.  
Here are some setup examples for the PoE Injector:  
PoE Injector with the devices that support PoE:  
6
 
 
PoE Injector RNWA-PoE-100  
User Manual  
3.1 Wired Setup  
7
 
 
PoE Injector RNWA-PoE-100  
User Manual  
3.2 Wireless Setup  
Thank you for purchasing a quality Rosewill Product.  
and future support for your product.  
Let us know!  
Rosewill Support: [email protected]  
Call Center: (800)575-9885  
8
 
 

Radio Shack Cash Register 60 1230 User Guide
RCA CRT Television F19422 User Guide
Roberts Radio Clock Radio ELPDC04 User Guide
Rosewill Computer Drive RX82 UJBOD User Guide
Rosewill Network Card RNX N150PC User Guide
Runco Projector Vision 85 User Guide
Samsung Cell Phone DS SM A500F User Guide
Samsung Computer Monitor 173MW User Guide
Sanyo Flat Panel Television DS27930 User Guide
Sanyo Projector PLC XL50A User Guide